H8530 Crane

H8530_Crane_pic_2.jpgMaintainer continues to expand crane options to its customers with the H8530 telescopic crane. The H8530 has a maximum lift capacity of 8,500 pounds, has a 52,500 foot*pound crane rating and a boom-mounted planetary winch.

The H8530 has the same reach as our new H10030, but gives customers an option between that and the 7,000 lb. crane in our product line.

It is also the first to be installed with the Advanced Crane Control 2.0. The upgraded safety and performance features of this version offer better visibility of lifting loads and error codes if instability with a lift is detected. The proportional wireless remote integrates with our new switch panel assembly using a CAN System to improve operator efficiency.

The hexagonal boom sections on Maintainer cranes are self-aligning, have improved strength to weight ratio, and have easily-serviced wear pads. Nitrided cylinder rods have improved wear and impact resistance, improved corrosion resistance, and an improved seal life. The hydraulic hoses are protected from harsh working environments. Even the crane and outrigger valves are protected under the truck body. The initial crane inspection is performed at the factory for turnkey performance – your crane is ready to go to work when your truck is delivered!


  • 2390 lbs. (1084 KGS)
  • 22” x 22” Mounting Space Required
  • Mounting requires (8) 7/8-9 (GRD-8) bolts
  • Hydraulic Requirements: 
  • 10-12 GPM@3000 PSI
  • 8,500 lb. max. capacity
  • 52,500 ft-lb capacity
  • 30’ hydraulic reach
  • Advanced Crane Control 2.0 - standard
  • Total operational range 91 degrees (-13 to +78)
  • 615 degrees of rotation


  • Boom-Mounted planetary winch
  • Dual part line standard - single part capable
  • Low profile double sheave design
  • Anti-Two block reel located on left side
  • User-friendly load block storage
  • 140’ of 3/8” diameter wire rope
  • Hexagonal boom
  • Wireless remote - standard
  • Tall and short tower configurations
  • Closed-center/load sensing hydraulic system (open center optional)
  • OSHA 1910.180/ANSI B30.5 compliant

More Information


Request More Information

Fill out the form below and we'll get back to you in no time flat.